Pyxis^® ProcedureRoller™ System Specifications

The information contained herein should be used for general planning only. Please confirm specifications with your CareFusion representative.

Station Specifications

Equipment	Configuration	Dimensions Inches (cm) H x W x D	Weight (empty) Lb (Kg)	Operating power	BTU/hr**
Pyxis® ProcedureStation™	Single column main	79.5 x 31 x 28 (201.9 x 78.8 x 71.2)	370 (170)	110V~ 3A 60Hz	490
Pyxis® ProcedureStation™	Double column main	79.5 x 52 x 28 (201.9 x 132.1 x 71.2)	640 (290)	110V~ 3A 60Hz	522
Pyxis® ProcedureStation™ half-height	Half-height, single-column main	54 x 31.5 x 28 (137.2 x 80.1 x 71.2)	290 (130)	100-240V~ 3A 50/60Hz	345
Pyxis® ProcedureStation™	Double column auxiliary	79.5 x 52 x 28 (201.9 x 132.1 x 71.2)	580 (265)	110V~ 3A 60Hz	522
Pyxis® ProcedureStation™ half-height	Half-height, single-column auxiliary	43 x 31.5 x 28 (109.2 x 80.1 x 71.2)	260 (118)	100-240V~ 3A 50/60Hz	345

*Stations require additional 3" in height and 4-6" in back (depth) for ventilation; 35" in front for swinging doors.
**Power consumption is based on maximum operation with average line voltage.

Specifications

Processor/Memory	Currently Pentium II 433, 64 MB RAM
Manual Release	Single lever (beneath keyed top flap); side-flap for half-height units
Additional Security Options	Two locks to secure the top flap/rear panel, lock loop system available. Seismic anchoring available.
Software Information Operating System	Pyxis proprietary Pyxis SupplyStation automated inventory management system software
Database Engine	Windows NT Workstation 4.0 w/Service Pack 6a Sybase SQL Anywhere 6.0.3
Communication	Serial (RS), modem, and network (TCP/IP over Ethernet)--one crop/line required per main unit
Input Circuit Protection	Resettable circuit breaker(s) on the side of the power switch panel that is located at the top of the unit for all SupplyStations and CathRack units; located in the back of the unit for half-height units.
Signal Connection	Inter-system: dual RJ11 & RS-485. proprietary protocol. Not to be connected to telephone circuits
Ventilation	Fan cooled
Mode of Operation	Continuous
Power Connections	IEC320 10A Male receptacle. Panel mount on upper rear center column for SupplyStations and CathRack; lower rear corner on back of half-height units
Storage and Operating Environment	Temperature: 15-35 degrees C Atmospheric Pressure Range: 700-1060 hPa Relative Humidity: 30-75%, Non-condensing
Contaminants/Pollution	Suitable for operation in a Pollution Degree 2 environment
All Units	Latex-free (Lexan/polypropylene construction)